Forklift Battery Charger 24V 20A Forklift Charger 24V Battery Charger 20 Amp

  
Forklift Battery Charger 24V 20A Forklift Charger 24V Battery Charger 20 Amp Lead Acid Battery Charger 24V Charger and Maintainer 24 Volt Trickle Charger for Forklift, Pallet Jack, Floor Scrubber, etc. Product Dimensions: 7.6"D x 5.1"W x 2.8H. Item Weight: 4.6 Pounds. Output Voltage: 24 Volts (DC).

Product Dimensions: 7.6 x 5.1 x 2.8 inches. Item Weight: 4.6 pounds. Item model number: 24V 20A Forklift Battery Charger. Date First Available: December 8, 2023. 1.20A 600W Charging & Fan Design & Overheating ProtectionThis fully automatic smart charger is suitable for all vehicles equipped with 24V lead-acid batteries, such as forklifts, floor washers, sightseeing cars, and golf carts.

The fan always runs during charging to effectively cool the charger and ensure stable operation. The operating temperature range of the 24 volt battery charger is 0C+45C. When the ambient temperature exceeds 65C, the charger will automatically shut down for protection. Voltage and Current Display & Charging Completion PromptThe 24 volt charger adopts constant voltage and constant current mode for intelligent charging. The display shows "2420" to indicate that this is a 24V20A charger.

When charging, the display will alternately show the charging voltage and current (the last letter "U" means "Voltage" and "R" means "Current"). After the battery is fully charged, the forklift battery charger will automatically stop output and the display will show "FULL". Fault Code Prompt and Fan Stops WorkingWhen the 24v charger has the following six conditions, the corresponding fault code will be displayed on the screen, the fan will stop rotating, and the charger will stop working. (1) No-load state; (2) When the connected battery pack voltage is lower than the pre-charge voltage limit; (3) When the voltage of the connected battery pack is higher than the trickle charging voltage; (4) The temperature exceeds 65C; (5) Short circuit; (6) Reverse polarity.

Output Protection Device & Charging Time ControlDuring the charging process, the 24v battery charger will automatically adjust the output voltage and current. When the battery is reverse-connected and the output is short-circuited, the internal circuit of the 24v charger is disconnected from the battery and will not damage the charger. The 24 volt charger is set with a maximum charging time (15 hours), which can effectively avoid battery damage caused by overcharging. 5.7.4ft Cable & Anderson Plug & Portable HandleThe 24v lead acid battery charger comes with a 4ft power cord, 3.4ft charging cable and battery quick connector to charge your vehicle quickly and safely. The 24 volt forklift battery charger also comes with a spare plug connector and 2 terminal pins for wider use.

The 24v battery charger weighs 4.6 pounds and has an easy-to-carry handle on the top, so you can easily carry it anywhere. FCC and ETL Certification & 3-Year WarrantyThis 24v battery charger has an input voltage of AC 100-240V, has FCC and ETL certification, and can also repair batteries with vulcanized plates.