24V 30A Forklift Battery Charger, 1250W Smart 7-Stage Trickle Charger, IP67 Wate

  

Fast Charging & Wide Application: 24V/30A/1250W fully-automatic smart charger, ideal for all 24 Volts lead-acid battery-powered vehicles forklifts, floor scrubbers, golf carts, patrol cars, etc. ; Plug-and-play, connect battery terminals, insert 110V plug, 3s self-test then charge, auto-stop when full; 7-stage smart charging with trickle mode prevents overcharging, extends battery life; Built-in cooling fan ensures stable operation. Intelligent Temperature Compensation & 3-Color Indicator Light: Upgraded with a built-in temp sensor to adjust charging voltage per ambient conditions for optimal performance; Red and Green flash: waiting mode or no-Load, Red flash: low charging.

80%, Green flash: trickle mode, Green on: fully charged(100%). Six Safe Charging Protections: Built-in circuit safeguards provide overvoltage & overcurrent protection.

No output without battery connection, reverse-connection/short-circuit cuts off internal circuits to avoid damage, auto-shuts down at high temps and resumes charging when cooled. IP67 Waterproof, Shockproof & Temperature-Resistant: Durable aluminum body for daily wear. IP67 waterproof/ dustproof & automotive-grade shockproof for outdoor use. 9.8 FT Cable & Anderson Plug: The 24 volt battery charger comes with a 9.8ft heavy-duty cable (4.9ft power cord and 4.9ft charging cable) and battery quick connector to charge your vehicle quickly and safely. The charger additionally comes with a spare plug connector and 2 terminal pins for wider use. FCC and ETL Certification & Portable Handle: This 24 volt battery charger adopts PFC and LLC technology, undergoes a 100% full load aging test, and is FCC and ETL certified, providing unparalleled reliability and lower power consumption. The forklift battery charger weighs 6.4 pounds and has an easy-to-reach handle, so you can easily carry the charger with you. The LED indicator light lets you easily know the charging status of the charger. The 24 volt battery charger weighs 6.4 pounds and has an easy-to-reach handle so you can easily carry the charger with you. High and Low Temperature Resistance. Charging Protection and Smart Charging. The 24v charger has a special temperature sensor that can adjust the charging voltage and current according to the ambient temperature. The circuit protection device can avoid damaging the circuit. When the internal temperature of the charger exceeds a certain value, the charging current will automatically decrease.

When the ambient temperature exceeds 65°C, the charger will shut down for protection. When the temperature recovers, it will automatically charge. When the battery is connected reversely, the internal circuit of the charger will be disconnected from the battery, which will not damage the charger. The 24 volt battery charger has no output when the battery is not connected.

When the output is short-circuited, the internal circuit of the charger is disconnected from the battery. Charging can only be resumed when the battery is reconnected after the fault is eliminated. Plug and Forget Smart Charging. After fully charged, it automatically stops output and enters trickle mode charging, which will not overcharge the battery and effectively prolong battery life.

Applicable Batteries: All types of lead-acid batteries. Output Voltage and Current: 24V 30A.

To allow the heat generated by the charger to be discharged out of the car smoothly, all vents should be unblocked and the space should not be sealed. There should be enough space near the 24 volt charger to ensure ventilation and dust prevention, and to prevent dust from accumulating on the surface and affecting the heat dissipation effect. The 24v charger is not allowed to be disassembled. Opening the charger cover at will may cause electric shock or other damage. To avoid damaging the charger harness, do not place objects on the charger harness or where it can be easily carved.

If the wiring harness is damaged, replace it immediately. If the AC power source requires an extension cord, please ensure that the extension cord can withstand the maximum input current of the charger, and keep the length of the extension cord within a certain limit to avoid affecting the normal operation of the charger. For the connection line between the 24 volt battery charger and the battery, the maximum current voltage drop should be less than 1% of the current voltage, otherwise, the charging effect will be affected. At the same time, the lead diameter should meet the output current value.