24 VOLT 60 AMP 240V Single Phase Battery Charger 208V / 220V 24V / 60A

  

Output DC: 24V - 60A. Input AC: 1 x 240 - 9A. But since it's been sitting around collecting dust I'm listing it as used. This comes with the charger cables with the ends cut. You need to connect the specific connector that you need.

You will also need to connect your own power cord for the AC input. The charger must be connected to the AC input using an adequate cable and plug, with disconnect switch and fuses. Make sure that the unit's maximum input power (reported on the data label) is available from your power supply, and verify that the unit's operating voltage is correct. The proper setting of the transformer taps is fundamental for the correct operation of the charger. If the real AC input voltage is different than the AC nominal voltage to which the charger is set, the charging current of the charger may be significantly different than the nominal. Please let me know if you have any questions.